Purchased from the original owner. Overall the bike was in good shape but the cosmetics were something else! The motor is still standard bore but was stripped down. Re-did the rod as it had indexed on the crank pin, put on a new primary chain, new bearings and new seals & gaskets. The carb was boiled out and new jets were installed along with a new slide. New chains and sprockets were also installed I used the original rims but just re-spoked them and did the typical things like re-cut the drums with over size linings, strip and paint the frame and put on new plastic and graphics.
 

Orders: 1-844-477-5746 Tech Support: (250) 477-5746 E-mail: maicomaster@shaw.ca